Teknik Veriler
Ocak bileşenleri
Bu sayfalar ocak, güç kaynağı, kondansatör, soğutma kulesi veya parçayı daraltır. Kesin sayılar tekliftedir.
Orta Frekans Ocakları için Su Soğutmalı Bakır İndüksiyon Bobini
Orta Frekans Ocakları için Su Soğutmalı Bakır İndüksiyon Bobini, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Conductor | Rectangular copper tube, 99.9% copper |
| US material standard | ASTM B75 seamless copper tube |
| Insulation | Electrostatic spray, high-strength epoxy |
| Insulation withstand | Above 5000 V |
| Turn spacing after fixing | Error not above 2 mm |
| End cooling | Water-cooled turns at the top and bottom of the coil |
| Large coil shown | 60 t medium-frequency coil on the GW sheet |
| Shell on small furnaces | 50 kg–3000 kg aluminum-alloy shell on the same sheet |
| US standard | Applies to |
|---|---|
| ASTM B75 | Seamless copper tube, water-cooled coil |
| ASTM B152 | Copper sheet and strip where used on connections |
| NFPA 86 | Furnace water-circuit safety interlock |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.
Orta Frekans İndüksiyon Ocakları için Manyetik Boyunduruk
Orta Frekans İndüksiyon Ocakları için Manyetik Boyunduruk, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Steel | Cold-rolled high-permeability silicon steel |
| US material standard | ASTM A876 grain-oriented electrical steel |
| Sheet thickness | 0.35 mm |
| Shape | Arc matches the outside of the induction coil |
| Clamps | Stainless side plates and stainless tie rods |
| Cooling pipe test | 0.45 MPa, no leak within 15 minutes |
| Duty | Collects stray flux, supports the coil, shields the frame |
| US standard | Applies to |
|---|---|
| ASTM A876 | Flat-rolled grain-oriented electrical steel, 0.35 mm class |
| ASTM A240 | Stainless side plates and tie hardware |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.
Orta Frekans Güç Kaynakları için DC Düzleştirme Reaktörü
Orta Frekans Güç Kaynakları için DC Düzleştirme Reaktörü, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Place in the circuit | DC bus between the rectifier and the inverter |
| First duty | Smooths the rectifier current |
| Second duty | Limits current rise if the inverter sees a short circuit |
| US harmonic standard | IEEE 519, together with 6, 12 or 24 pulse rectification |
| Rectifier | 5th | 7th | 11th | 13th | 17th | 19th | 23rd | 25th |
|---|---|---|---|---|---|---|---|---|
| 6 pulse | 0.175 | 0.11 | 0.045 | 0.029 | 0.015 | 0.01 | 0.009 | 0.008 |
| 12 pulse | — | — | 0.007 | 0.004 | 0.002 | 0.001 | 0.0009 | 0.0008 |
| 24 pulse | — | — | — | — | — | — | 0.0006 | 0.0005 |
| US standard | Applies to |
|---|---|
| IEEE 519 | Harmonic current limits, matched to 6 / 12 / 24 pulse rectifiers |
| NFPA 70 (NEC) | Incoming voltage, grounding and disconnect |
| UL 508A | Control cabinet construction |
| NEMA 250 | Enclosure type for the power cabinets |
| NEMA MG 1 | Cooling-fan and pump motors |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.
Bir-İki Eritme Hatları için Ocak Geçiş Anahtarı
Bir-İki Eritme Hatları için Ocak Geçiş Anahtarı, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Duty | Moves the medium-frequency supply from one furnace to the other |
| Operation | Electric or manual |
| Transfer time | About 20 seconds |
| Contact | High clamping force for the furnace current |
| US standard | Applies to |
|---|---|
| IEEE 519 | Harmonic current limits, matched to 6 / 12 / 24 pulse rectifiers |
| NFPA 70 (NEC) | Incoming voltage, grounding and disconnect |
| UL 508A | Control cabinet construction |
| NEMA 250 | Enclosure type for the power cabinets |
| NEMA MG 1 | Cooling-fan and pump motors |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.
Orta Frekans İndüksiyon Ocakları için Su Soğutmalı Kablo
Orta Frekans İndüksiyon Ocakları için Su Soğutmalı Kablo, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Duty | Flexible link from the power supply and capacitor bank to the tilting furnace |
| Construction | Stranded conductor, outer hose, lugs and water ports |
| Supply scope | 1 set included with a GW furnace system |
| US material note | Copper to ASTM B187 where a rigid bus is used instead of the cable |
| US standard | Applies to |
|---|---|
| ASTM B75 | Seamless copper tube, water-cooled coil |
| ASTM B152 | Copper sheet and strip where used on connections |
| NFPA 86 | Furnace water-circuit safety interlock |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.
Kondensatör ve Ocak Çıkışı için Su Soğutmalı Bakır Bara
Kondensatör ve Ocak Çıkışı için Su Soğutmalı Bakır Bara, çalışan bir eritme satın alan dökümhaneler içindir, tek bir parça için değil. Kapasite, güç, frekans ve soğutma metale ve şebekeye göre belirlenir.
| Item | Catalog value |
|---|---|
| Duty | Flexible link from the power supply and capacitor bank to the tilting furnace |
| Construction | Stranded conductor, outer hose, lugs and water ports |
| Supply scope | 1 set included with a GW furnace system |
| US material note | Copper to ASTM B187 where a rigid bus is used instead of the cable |
| US standard | Applies to |
|---|---|
| ASTM B75 | Seamless copper tube, water-cooled coil |
| ASTM B152 | Copper sheet and strip where used on connections |
| NFPA 86 | Furnace water-circuit safety interlock |
Every figure in these tables is taken from the factory sheets in the product folder and is written in English. 1 metric ton = 1.102 US short tons. Power-supply ratings can still be negotiated to the customer requirement, as the sheet itself states. American standards are the US specifications normally requested with this equipment.